| Citation: | Liu Yuwei, Li Heyan, Ye Fuhao. A fast numerical method based on static reduction for the solution of the contact problem of the piston ring[J]. Journal of Mining Science and Technology, 2017, 2(4): 389-394.
|
| [1] |
郝妮妮,于岩,刘华伟.基于仿生学的矿用自卸车车斗结构设计[J].煤炭技术,2014,33(5):217-219.
|
| [2] |
Hao Nini,Yu Yan,Liu Huawei.Structural design of mining dump truck bucket based on bionics[J].Coal Technology,2014,33(5):217-219.
|
| [3] |
马玉敏.170T电传动自卸车发动机系统设计及散热技术研究[D].西安:长安大学,2015.
|
| [4] |
张伟.电动轮矿用自卸车发动机—发电机轴系扭振分析与试验研究[D].北京:北京科技大学,2015.
|
| [5] |
万海如,唐新蓬,段家典.重型矿用电动轮自卸车的现状和发展趋势[J].汽车工业研究,2001(4):16-22.
|
| [6] |
Wan Hairu,Tang Xinpeng,Duan Jiadian.Present Status and developing trend of heavy duty electric wheel dump truck used in mine[J].Auto Industry Research,2001(4):16-22.
|
| [7] |
黄代凤.根据活塞环自由形状求解活塞环压力分布[J].内燃机与配件,2006(6):6-8.
|
| [8] |
Huang Daifeng.Solution to piston ring pressure distributing with unstained state[J].Internal Combustion Engine & Parts,2006(6):6-8.
|
| [9] |
Smith E H.Optimising the design of a piston-ring pack using DoE methods[J].Tribology International,2011,44(1):29-41.
|
| [10] |
吴志红.改进活塞环设计降低漏气量[J].内燃机与配件,2005(1):19-21.
|
| [11] |
Wu Zhihong.Design of improvement piston ring for reducing blowby[J].Internal Combustion Engine & Parts,2005(1):19-21.
|
| [12] |
Ahn Y J,Barber J R.Response of frictional receding contact problems to cyclic loading[J].International Journal of Mechanical Sciences,2008,50(10/11):1519-1525.
|
| [13] |
Kim J H,Yong H J.Frictional hertzian contact problems under cyclic loading using static reduction[J].International Journal of Solids & Structures,2014,51(1):252-258.
|
| [14] |
Bertocchi E.Selected topics on the plane elastic contact with friction[D].Modena:University of Modena and Reggio Emilia,2009.
|
| [15] |
Liu Y,Yong H J,Barber J R.Finite element implementation of an eigenfunction solution for the contact pressure variation due to wear[J].Wear,2013,309(1/2):134-138.
|
| [16] |
Tian T.Modeling the performance of the piston ring-pack in internal combustion engines[D].Cambridge:Massachusetts Institute of Technology,1997.
|
| [17] |
Smedley G.Piston ring design for reduced friction in modern internal combustion engines[D].Cambridge:Massachusetts Institute of Technology,2004.
|
| [18] |
Usman A,Park C W.Numerical investigation of tribological performance in mixed lubrication of textured piston ring-liner conjunction with a non-circular cylinder bore[J].Tribology International,2017,105:148-157.
|
| [19] |
Thaitirarot A,Flicek R C,Hills D A,et al.The use of static reduction in the finite element solution of two-dimensional frictional contact problems[J].Journal of Mechianical Engineering Science,2014,228(9):1474-1487.
|
| [20] |
杨晓京.固体颗粒杂质影响活塞环-缸套润滑、磨损的理论及试验装备研究[D].杭州:浙江大学,2008.
|
DownLoad: