Modified Hoek-Brown criterion model for laminated rock based on fracture mechanics

Li Yingjie; Wang Bingqian; Zuo Jianping; Xue Dongjie; Liu Dejun

doi:10.19606/j.cnki.jmst.2022.04.010

Volume 7 Issue 4

Aug. 2022

Turn off MathJax

Article Contents

Article Navigation > Journal of Mining Science and Technology > 2022 > 7(4): 481-489

Li Yingjie, Wang Bingqian, Zuo Jianping, Xue Dongjie, Liu Dejun. Modified Hoek-Brown criterion model for laminated rock based on fracture mechanics[J]. Journal of Mining Science and Technology, 2022, 7(4): 481-489. doi: 10.19606/j.cnki.jmst.2022.04.010

Citation:

PDF( 3883 KB)

Modified Hoek-Brown criterion model for laminated rock based on fracture mechanics

doi: 10.19606/j.cnki.jmst.2022.04.010

School of Mechanics and Civil Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China

Received Date: 2021-08-22
Rev Recd Date: 2021-11-15
Publish Date: 2022-08-30

Abstract

Abstract

Based on the fracture mechanics theory of the isotropic Hoek-Brown strength criterion, this paper established the initiation conditions of the bifurcated microcrack along bedding which begins with the meso-fracture mechanism of laminated rocks. Then the author substituted the critical angle which indicates that the initial crack most likely causes the fracture of the rock into above established conditions and derived the anisotropy expression of the parameter m₁ for the weak plane of bedding leading to the crack deflection. Through introducing the correction coefficient for the mixed fracture of the rock along the bedding and the matrix, this paper obtained the anisotropic modified model of Hoek-Brown strength criterion. Compared with the established anisotropic Hoek-Brown model and shale triaxial test results, the validity of the model was proved. The modified model inherits the fracture mechanics analysis of the isotropic Hoek-Brown strength criterion for the selection of rock failure characteristic quantity, and reflects the microscopic failure mechanism of the rock, also considers the effect of bedding anisotropy. The parameters in the modified criterion have a clear physical meaning. The parameter m in the model is related to the angle of the bedding plane, the tensile strength, compressive strength and friction coefficient of bedding and matrix. The change in the friction coefficient of the bedding plane will cause the position of the minimum value of m and the rock strength characteristics changed.
- laminated rock,
- Hoek-Brown criterion,
- fracture mechanics,
- fracture criterion,
- anisotropic correction

FullText(HTML)

References(25)

References

[1]	唐杰, 吴国忱. 低孔隙度泥页岩应力依赖的各向异性裂纹演化特性研究[J]. 地球物理学报, 2015, 58(8): 2986-2995. https://www.cnki.com.cn/Article/CJFDTOTAL-DQWX201508031.htm Tang Jie, Wu Guochen. Stress-dependent anisotropy of mudstone and shale with low porosity[J]. Chinese Journal of Geophysics, 2015, 58(8): 2986-2995. https://www.cnki.com.cn/Article/CJFDTOTAL-DQWX201508031.htm
[2]	Kanfar M F, Chen Z, Rahman S S. Effect of material anisotropy on time-dependent wellbore stability[J]. International Journal of Rock Mechanics and Mining Sciences, 2015, 78: 36-45. doi: 10.1016/j.ijrmms.2015.04.024
[3]	Kuila U, Dewhurst D N, Siggins A F, et al. Stress anisotropy and velocity anisotropy in low porosity shale[J]. Tectonophysics, 2011, 503(1/2): 34-44.
[4]	Heng S, Guo Y T, Yang C H, et al. Experimental and theoretical study of the anisotropic properties of shale[J]. International Journal of Rock Mechanics and Mining Sciences, 2015, 74: 58-68. doi: 10.1016/j.ijrmms.2015.01.003
[5]	杨国梁, 毕京九, 张志飞, 等. 被动围压下层理角度对页岩动态强度及耗能的影响[J]. 矿业科学学报, 2021, 6(2): 188-195. doi: 10.19606/j.cnki.jmst.2021.02.006 Yang Guoliang, Bi Jingjiu, Zhang Zhifei, et al. The influence of the bedding angle under passive confining pressure on the dynamic strength and energy consumption of shale[J]. Journal of Mining Science and Technology, 2021, 6(2): 188-195. doi: 10.19606/j.cnki.jmst.2021.02.006
[6]	Jaeger J C. Shearfailure of anistropicrocks[J]. Geological Magazine, 1960, 97(1): 65-72. doi: 10.1017/S0016756800061100
[7]	刘亚群, 李海波, 李俊如, 等. 基于Hoek-Brown准则的板岩强度特征研究[J]. 岩石力学与工程学报, 2009, 28(S2): 3452-3457. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2009S2028.htm Liu Yaqun, Li Haibo, Li Junru, et al. Study on strength characteristics of slates based on hoek-brown criterion[J]. Chinese Journal of Rock Mechanics and Engineering, 2009, 28(S2): 3452-3457. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2009S2028.htm
[8]	Hoek E, Brown E T. Underground excavations in Rock[M]. London: The Institution of Mining and Metallurgy, 1980.
[9]	Hoek E., Kaiser P K, Bawden W F. Support of underground excavations in hard rock[M]. Rotterdam, A.A. Balkena, 1995.
[10]	李全生, 徐祝贺, 张勇, 等. 基于Hoek-Brown准则的薄基岩厚松散层覆岩变形破坏特征研究[J]. 矿业科学学报, 2019, 4(5): 417-424. http://kykxxb.cumtb.edu.cn/article/id/241 Li Quansheng, Xu Zhuhe, Zhang Yong, et al. Study on deformation and failure characteristics of overlying strata with thick loose layers and thin bedrock based on Hoek-Brown criterion[J]. Journal of Mining Science and Technology, 2019, 4(5): 417-424. http://kykxxb.cumtb.edu.cn/article/id/241
[11]	Zuo J P, Li H T, Xie H P, et al. A nonlinear strength criterion for rock-like materials based on fracture mechanics[J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(4): 594-599. doi: 10.1016/j.ijrmms.2007.05.010
[12]	李洪涛, 左建平, 李辉. Hoek-Brown强度准则的断裂力学理论研究[J]. 岩土工程学报, 2004, 26(2): 212-215. doi: 10.3321/j.issn:1000-4548.2004.02.011 Li Hongtao, ZuoJianping, Li Hui. Theoretical research of Hoek-Brown empirical strength criterion[J]. Chinese Journal of Geotechnical Engineering, 2004, 26(2): 212-215. doi: 10.3321/j.issn:1000-4548.2004.02.011
[13]	Zuo J P, Liu H H, Li H T. A theoretical derivation of the Hoek-Brown failure criterion for rock materials[J]. Journal of Rock Mechanics and Geotechnical Engineering, 2015, 7(4): 361-366. doi: 10.1016/j.jrmge.2015.03.008
[14]	Saroglou H, Tsiambaos G. A modified Hoek-Brown failure criterion for anisotropic intact rock[J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(2): 223-234. doi: 10.1016/j.ijrmms.2007.05.004
[15]	Lee Y K, Pietruszczak S. Application of critical plane approach to the prediction of strength anisotropy in transversely isotropic rock masses[J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(4): 513-523. doi: 10.1016/j.ijrmms.2007.07.017
[16]	Ismael M A, Imam H F, El-Shayeb Y. A simplified approach to directly consider intact rock anisotropy in Hoek-Brown failure criterion[J]. Journal of Rock Mechanics and Geotechnical Engineering, 2014, 6(5): 486-492. doi: 10.1016/j.jrmge.2014.06.003
[17]	Shi X C, Yang X, Meng Y F, et al. Modified Hoek-Brown failure criterion for anisotropic rocks[J]. Environmental Earth Sciences, 2016, 75(11): 1-11.
[18]	高岳. 各向异性多孔材料的强度与断裂问题研究[D]. 北京: 清华大学, 2018.
[19]	Hou C, Jin X C, Fan X L, et al. A generalized maximum energy release rate criterion for mixed mode fracture analysis of brittle and quasi-brittle materials[J]. Theoretical and Applied Fracture Mechanics, 2019, 100: 78-85. doi: 10.1016/j.tafmec.2018.12.015
[20]	Williams M L. On the stress distribution at the base of a stationary crack[J]. Journal of Applied Mechanics, 1957, 24(1): 109-114. doi: 10.1115/1.4011454
[21]	Wang Y, Li C H, Hu Y Z. Experimentalinvestigation on the fracture behaviour of black shale by acoustic emission monitoring and CT image analysis during uniaxial compression[J]. Geophysical Journal International, 2018, 213(1): 660-675. doi: 10.1093/gji/ggy011
[22]	贾长贵, 陈军海, 郭印同, 等. 层状页岩力学特性及其破坏模式研究[J]. 岩土力学, 2013, 34(S2): 57-61. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX2013S2010.htm Jia Changgui, Chen Junhai, Guo Yintong, et al. Research on mechanical behaviors and failure modes of layer shale[J]. Rock and Soil Mechanics, 2013, 34(S2): 57-61. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX2013S2010.htm
[23]	何柏, 谢凌志, 李凤霞, 等. 龙马溪页岩各向异性变形破坏特征及其机理研究[J]. 中国科学: 物理学力学天文学, 2017, 47(11): 107-118. https://www.cnki.com.cn/Article/CJFDTOTAL-JGXK201711012.htm He Bo, Xie Lingzhi, Li Fengxia, et al. Anisotropic mechanism and characteristics of deformation and failure of Longmaxi shale[J]. Scientia Sinica: Physica, Mechanica & Astronomica, 2017, 47(11): 107-118. https://www.cnki.com.cn/Article/CJFDTOTAL-JGXK201711012.htm
[24]	桑宇, 杨胜来, 赵飞, 等. 南方海相页岩各向异性及压裂破坏特征研究[J]. 钻采工艺, 2015, 38(2): 71-74, 10. doi: 10.3969/J.ISSN.1006-768X.2015.02.20 Sang Yu, Yang Shenglai, Zhao Fei, et al. Research on anisotropy and failure characteristics of southern marine shale rock[J]. Drilling & Production Technology, 2015, 38(2): 71-74, 10. doi: 10.3969/J.ISSN.1006-768X.2015.02.20
[25]	陈天宇, 冯夏庭, 张希巍, 等. 黑色页岩力学特性及各向异性特性实验研究[J]. 岩石力学与工程学报, 2014, 33(9): 1772-1779. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201409007.htm Chen Tianyu, Feng Xiating, Zhang Xiwei, et al. Experimental study on mechanical and anisotropic properties of black shale[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(9): 1772-1779. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201409007.htm

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(7) / Tables(4)

Get Citation

PDF

XML

Article Metrics

Article views (363) PDF downloads(53)

Modified Hoek-Brown criterion model for laminated rock based on fracture mechanics

doi: 10.19606/j.cnki.jmst.2022.04.010

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Export File

Citation

Format

Content