Influence of roof cutting parameters on stability of surrounding rock of gob-side entry retaining

Sheng Fengtian; Zhang Yong; Wei Wensheng; Duan Yuqing; Mao Kaibin

doi:10.19606/j.cnki.jmst.2022.03.007

Volume 7 Issue 3

Jun. 2022

Turn off MathJax

Article Contents

Article Navigation > Journal of Mining Science and Technology > 2022 > 7(3): 322-332

Sheng Fengtian, Zhang Yong, Wei Wensheng, Duan Yuqing, Mao Kaibin. Influence of roof cutting parameters on stability of surrounding rock of gob-side entry retaining[J]. Journal of Mining Science and Technology, 2022, 7(3): 322-332. doi: 10.19606/j.cnki.jmst.2022.03.007

Citation:

PDF( 9316 KB)

Influence of roof cutting parameters on stability of surrounding rock of gob-side entry retaining

doi: 10.19606/j.cnki.jmst.2022.03.007

1.
School of Energy and Mining Engineering, China University of Mining and Technology-Beijing, Beijing 100083, China
2.
Shanxi Fenxi Mining (Group) Co., LTD., Jiexiu Shanxi 032000, China

Received Date: 2021-07-06
Rev Recd Date: 2021-11-24
Publish Date: 2022-06-20

Abstract

Abstract

As one of the core issues of roof cutting pressure relief gob-side entry retaining technology, roof cutting parameters have a great influence on the stability of surrounding rock.Taking the 1226 working face of Shuguang Mine as the engineering background, the reference values of cutting top height and cutting top Angle are 7.1~9.5 m and 11.4° respectively through theoretical analysis.Through numerical simulation, the roof collapse form, roof subsidence and stress distribution of solid coal side are analyzed when the roof cutting height is 4 m, 7 m, 10 m, 13 m and the roof cutting Angle is 0°, 10°, 15°, 20° and 30° respectively from two angles of roof cutting effect and surrounding rock deformation.The results show that the optimal cutting top parameters are the cutting top height 10 m and the cutting top Angle 15°.The optimum hole spacing, blasting method and charge quantity are determined by field blasting test.The surrounding rock deformation of the rear roadway of the working face was monitored after the roadway retaining.The deformation of the surrounding rock of the roadway was small and the effect of the roadway retaining was good.
- top cutting parameters,
- gob-side entry retaining,
- surrounding rock stability,
- numerical simulation,
- field test

FullText(HTML)

References(22)

References

[1]	何满潮, 朱国龙. "十三五"矿业工程发展战略研究[J]. 煤炭工程, 2016, 48(1): 1-6. doi: 10.3969/j.issn.1008-4495.2016.01.001 He Manchao, Zhu Guolong. Research on development strategy of mining engineering in the Thirteenth Five-Year Plan[J]. Coal Engineering, 2016, 48(1): 1-6. doi: 10.3969/j.issn.1008-4495.2016.01.001
[2]	申浩, 张百胜, 贺新. 大采高工作面切顶卸压沿空留墙技术可行性研究[J]. 煤矿安全, 2020, 51(1): 69-74. https://www.cnki.com.cn/Article/CJFDTOTAL-MKAQ202001016.htm Shen Hao, Zhang Baisheng, He Xin. Feasibility study on roof cutting and pressure relief technology of gob-side wall retaining in large mining height working face[J]. Safety in Coal Mines, 2020, 51(1): 69-74. https://www.cnki.com.cn/Article/CJFDTOTAL-MKAQ202001016.htm
[3]	何满潮, 王亚军, 杨军, 等. 切顶成巷工作面矿压分区特征及其影响因素分析[J]. 中国矿业大学学报, 2018, 47(6): 1157-1165. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGKD201806001.htm He Manchao, Wang Yajun, Yang Jun, et al. Zonal characteristics and its influence factors of working face pressure using roof cutting and pressure-relief mining method with no pillar and roadway formed automaticly[J]. Journal of China University of Mining & Technology, 2018, 47(6): 1157-1165. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGKD201806001.htm
[4]	胡涛, 侯公羽, 李子祥, 等. 深孔爆破切顶对沿空留巷围岩稳定性影响的研究[J]. 矿业科学学报, 2019, 4(4): 299-307. http://kykxxb.cumtb.edu.cn/article/id/227 Hu Tao, Hou Gongyu, Li Zixiang, et al. Study on the influence of deep hole blasting roof cutting on the stability of surrounding rock in gob-side entry retaining[J]. Journal of Mining Science and Technology, 2019, 4(4): 299-307. http://kykxxb.cumtb.edu.cn/article/id/227
[5]	孙恒虎, 吴健, 邱运新. 沿空留巷的矿压规律及岩层控制[J]. 煤炭学报, 1992, 17(1): 15-24. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB199201005.htm Sun Henghu, Wu Jian, Qiu Yunxin. Rules of ground pressure and strata control in gateways maintained in goaf[J]. Journal of China Coal Society, 1992, 17(1): 15-24. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB199201005.htm
[6]	柏建彪, 周华强, 侯朝炯, 等. 沿空留巷巷旁支护技术的发展[J]. 中国矿业大学学报, 2004, 33(2): 59-62. doi: 10.3969/j.issn.1009-105X.2004.02.013 Bo Jianbiao, Zhou Huaqiang, Hou Chaojiong, et al. Development of support technology beside roadway in goaf-side entry retaining for next sublevel[J]. Journal of China University of Mining & Technology, 2004, 33(2): 59-62. doi: 10.3969/j.issn.1009-105X.2004.02.013
[7]	陈勇, 柏建彪, 王襄禹, 等. 沿空留巷巷内支护技术研究与应用[J]. 煤炭学报, 2012, 37(6): 903-910. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201206004.htm Chen Yong, Bai Jianbiao, Wang Xiangyu, et al. Support technology research and application inside roadway of gob-side entry retaining[J]. Journal of China Coal Society, 2012, 37(6): 903-910. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201206004.htm
[8]	张农, 韩昌良, 阚甲广, 等. 沿空留巷围岩控制理论与实践[J]. 煤炭学报, 2014, 39(8): 1635-1641. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201408035.htm Zhang Nong, Han Changliang, Kan Jiaguang, et al. Theory and practice of surrounding rock control for pillarless gob-side entry retaining[J]. Journal of China Coal Society, 2014, 39(8): 1635-1641. https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201408035.htm
[9]	韩昌良, 张农, 李桂臣, 等. 大采高沿空留巷巷旁复合承载结构的稳定性分析[J]. 岩土工程学报, 2014, 36(5): 969-976. https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201405030.htm Han Changliang, Zhang Nong, Li Guichen, et al. Stability analysis of compound bearing structure of gob-side entry retaining with large mining height[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(5): 969-976. https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201405030.htm
[10]	李迎富, 华心祝. 沿空留巷上覆岩层关键块稳定性力学分析及巷旁充填体宽度确定[J]. 岩土力学, 2012, 33(4): 1134-1140. doi: 10.3969/j.issn.1000-7598.2012.04.026 Li Yingfu, Hua Xinzhu. Mechanical analysis of stability of key blocks of overlying strata for gob-side entry retaining and calculating width of roadside backfill[J]. Rock and Soil Mechanics, 2012, 33(4): 1134-1140. doi: 10.3969/j.issn.1000-7598.2012.04.026
[11]	华心祝. 我国沿空留巷支护技术发展现状及改进建议[J]. 煤炭科学技术, 2006, 34(12): 78-81. doi: 10.3969/j.issn.0253-2336.2006.12.027 Hua Xinzhu. Development status and improved proposals on gob-side entry retaining support technology in China[J]. Coal Science and Technology, 2006, 34(12): 78-81. doi: 10.3969/j.issn.0253-2336.2006.12.027
[12]	赵勇强, 何富连, 谢福星, 等. 沿空留巷围岩稳定等级综合评判及返修控制技术研究[J]. 矿业科学学报, 2017, 2(6): 550-558. http://kykxxb.cumtb.edu.cn/article/id/107 Zhao Yongqiang, He Fulian, Xie Fuxing, et al. Comprehensive Evaluation of Surrounding Rock Stability Grade and Repair Control Technology of Gob-side Entry Retaining[J]. Journal of Mining Science and Technology, 2017, 2(6): 550-558. http://kykxxb.cumtb.edu.cn/article/id/107
[13]	何满潮, 高玉兵, 杨军, 等. 无煤柱自成巷聚能切缝技术及其对围岩应力演化的影响研究[J]. 岩石力学与工程学报, 2017, 36(6): 1314-1325. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201706003.htm He Manchao, Gao Yubing, Yang Jun, et al. Study on coalbolt-free self-generated roadway shaped joint technology and its effect on stress evolution of surrounding rock[J]. Chinese Journal of Rock Mechanics and Engineering, 2017, 36(6): 1314-1325. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201706003.htm
[14]	张国锋, 何满潮, 俞学平, 等. 白皎矿保护层沿空切顶成巷无煤柱开采技术研究[J]. 采矿与安全工程学报, 2011, 28(4): 511-516. doi: 10.3969/j.issn.1673-3363.2011.04.003 Zhang Guofeng, He Manchao, Yu Xueping, et al. Research on the technique of no-pillar mining with gob-side entry formed by advanced roof caving in the protective seam in baijiao coal mine[J]. Journal of Mining & Safety Engineering, 2011, 28(4): 511-516. doi: 10.3969/j.issn.1673-3363.2011.04.003
[15]	孙晓明, 刘鑫, 梁广峰, 等. 薄煤层切顶卸压沿空留巷关键参数研究[J]. 岩石力学与工程学报, 2014, 33(7): 1449-1456. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201407017.htm Sun Xiaoming, Liu Xin, Liang Guangfeng, et al. Key parameters of gob-side entry retaining formed by roof cut and pressure releasing in thin coal seams[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(7): 1449-1456. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201407017.htm
[16]	郭志飚, 王将, 曹天培, 等. 薄煤层切顶卸压自动成巷关键参数研究[J]. 中国矿业大学学报, 2016, 45(5): 879-885. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGKD201605004.htm Guo Zhibiao, Wang Jiang, Cao Tianpei, et al. Research on key parameters of gob-side entry retaining automatically formed by roof cutting and pressure release in thin coal seam mining[J]. Journal of China University of Mining & Technology, 2016, 45(5): 879-885. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGKD201605004.htm
[17]	李民族, 马资敏, 薛定亮, 等. 坚硬顶板深浅孔组合聚能爆破技术研究及应用[J]. 矿业科学学报, 2020, 5(6): 616-623. doi: 10.19606/j.cnki.jmst.2020.06.003 Li Minzu, Ma Zimin, Xue Dingliang, et al. Research and application of combined shaped blasting technology with deep and shallow holes in hard roof[J]Journal of Mining Science and Technology, 2020, 5(6): 616-623. doi: 10.19606/j.cnki.jmst.2020.06.003
[18]	高玉兵, 杨军, 何满潮, 等. 厚煤层无煤柱切顶成巷碎石帮变形机制及控制技术研究[J]. 岩石力学与工程学报, 2017, 36(10): 2492-2502. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201710018.htm Gao Yubing, Yang Jun, He Manchao, et al. Mechanism and control techniques for gangue rib deformations in gob-side entry retaining formed by roof fracturing in thick coal seams[J]. Chinese Journal of Rock Mechanics and Engineering, 2017, 36(10): 2492-2502. https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201710018.htm
[19]	张礼, 赵晶, 王栓林. 大倾角煤层切顶成巷顶板结构演化及控制技术[J]. 矿业科学学报, 2020, 5(2): 169-178. http://kykxxb.cumtb.edu.cn/article/id/277 Zhang Li, Zhao Jing, Wang ShuanLin. Roof structure evolution and control technology of roof cutting roadway in large dip angle coal seam[J]. Journal of Mining Science and Technology, 2020, 5(2): 169-178. http://kykxxb.cumtb.edu.cn/article/id/277
[20]	刘小强, 张国锋. 软弱破碎围岩切顶卸压沿空留巷技术[J]. 煤炭科学技术, 2013, 41(S2): 133-134. https://www.cnki.com.cn/Article/CJFDTOTAL-MTKJ2013S2047.htm Liu Xiaoqiang, Zhang Guofeng. Technology of roof cutting pressure relief gob-side entry retaining in soft fractured stratum[J]. Coal Science and Technology, 2013, 41(S2): 133-134. https://www.cnki.com.cn/Article/CJFDTOTAL-MTKJ2013S2047.htm
[21]	钱鸣高, 石平五, 许家林. 矿山压力与岩层控制[M]. 徐州: 中国矿业大学出版社, 2010.
[22]	陈上元, 赵菲, 王洪建, 等. 深部切顶沿空成巷关键参数研究及工程应用[J]. 岩土力学, 2019, 40(1): 332-342, 350. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201901035.htm Chen Shangyuan, Zhao Fei, Wang Hongjian, et al. Determination of key parameters of gob-side entry retaining by cutting roof and its application to a deep mine[J]. Rock and Soil Mechanics, 2019, 40(1): 332-342, 350. https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201901035.htm

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(18) / Tables(5)

Get Citation

PDF

XML

Article Metrics

Article views (519) PDF downloads(49)

Influence of roof cutting parameters on stability of surrounding rock of gob-side entry retaining

doi: 10.19606/j.cnki.jmst.2022.03.007

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Export File

Citation

Format

Content