矿用智能供电系统高精度测频算法的研究

袁石良; 徐志强; 董杰; 朱启晨

矿用智能供电系统高精度测频算法的研究

¹中国矿业大学(北京) 化学与环境工程学院,北京100083;²北京四方继保自动化股份有限公司,北京100085

详细信息

作者简介:
袁石良（1974—），男，湖南株洲人，博士研究生，高级工程师，主要从事继电保护及检测与自动装置研究工作。

中图分类号: TD602
计量
- 文章访问数: 766
- HTML全文浏览量: 69
- PDF下载量: 112
- 被引次数: 0
出版历程
- 收稿日期: 2016-05-17
- 修回日期: 2016-11-18
- 刊出日期: 2016-10-29

Study on the high precision frequency measurement algorithm in the mine intelligent power supply system

¹School of Chemical and Environmental Engineering,China University of Mining and Technology, Beijing 100083,China;
²Beijing Sifang Automation Co., Ltd, Beijing 100085,China

摘要

摘要: 为解决矿用供电系统在频率时变条件下测频算法误差大的问题，提出一种改进的软件过零点算法。该算法建立了系统电压的相位角、时间和频率的关系式，根据相邻两个同方向的过零点相位相差2π的关系，推导出频率变化率非零条件下过零点处的实时频率与周期的关系式，综合运用牛顿三次插值多项式、牛顿迭代法和秦九韶算法得出周期计算公式，精确求解出实时频率和频率变化率。MATLAB仿真结果表明，该算法在供电系统待测信号中不含谐波、含有谐波和随机噪声以及系统频率在故障时快速下滑等情况下均可精确测量频率和频率变化率，在测量精度、实时性和计算量等方面优于传统过零点测频算法，完全适用于矿山智能供电系统中保护和测控类装置以及相关自动化设备的实际应用。
- 供电系统 /
- 频率 /
- 煤矿 /
- 智能矿山 /
- 过零点 /
- 频率变化率
Abstract: To solve the problem of the error of frequency measurement algorithm with timevarying frequency in mine power supply system, an improved software zerocrossing algorithm is proposed. The relationship among the phase angle, the time and the frequency of the voltage of the system is established. The relation formula between the realtime frequency and the period of zerocrossing point is derived when rate of frequency variation is not zero according to the relationship between two adjacent with the direction of the zerocrossing phase difference of 2π. The exact calculation formula of the period is obtained by using the Newton three interpolation polynomial, the Newton iteration method and the Qin Jiushao algorithm. Hence, the frequency and rate of frequency variation can be obtained. A variety of situations ,including signals without harmonics, signals with harmonics and random noise, as well as the frequency rapid decline process in system failure, are simulated using MATLAB, The simulation results show that the algorithm of this paper can accurately measure the realtime frequency of the system and rate of frequency variation in above situations, and this method is superior to conventional zerocrossing algorithm in measurement accuracy, instantaneity and computation. This algorithm is suitable for application of protection, control and monitoring devices and automation equipment in mine intelligent power supply system.
- power supply system, frequency, coal mine, intelligent mine, zero crossing /
- rate of frequency variation /

HTML全文

参考文献(15)

[1]	王彦文，高彦煤矿供电技术［M］. 徐州：中国矿业大学出版社，2013
[2]	张伏生,耿中行,葛耀中. 电力系统谐波分析的高精度FFT算法［J］. 中国电机工程学报，1999，3（3）：1-10.Zhang Fusheng, Geng Zhongxing, Ge Yaozhong. FFT algorithm with high accuracy for harmonic analysis in power system［J］. Proceedings of the Chinese Society for Electrical Engineering, 1999, 3（3）: 1-10.
[3]	谢小龙，韩英铎.电力系统频率测量综述［J］.电力系统自动化，1999， 23（3）： 54-58Xie Xiaolong, Han Yingduo. An overview on power system frequency measurement［J］. Automation of Electric Power Systems, 1999, 23（3）: 54-58.
[4]	Salcic Z,Nguang S K, Wu Yanzhen. An improved taylor method for frequency measurement in power systems［J］. IEEE Transactions on Instrumentation and Measurement,2009,58（9）:3288-3294.
[5]	许庆强基于幅值线性变化模型的频率测量新算法［J］. 电力系统自动化，2008，32（21）：32-36 Xu Qingqiang. A novel frequency measuring algorithm for the power system based on a linear amplitude model ［J］. Automation of Electric Power Systems, 2008, 32（21）: 32-36.
[6]	李一泉，何奔腾一种基于傅氏算法的高精度测频方法［J］. 中国电机工程学报，2005， 26（2）：78-81Li Yiquan, He Benteng. A highaccuracy algorithm for measuring frequency of power system based on fourier filter ［J］. Proceedings of the Chinese Society for Electrical Engineering, 2005, 26（2）: 78-81.
[7]	牟龙华，邢锦磊.基于傅里叶变换的精确频率测量算法［J］. 电力系统自动化，2008，32（23）： 67-70，94Mu Longhua，Xing Jinlei. An accurate frequency measuring algorithm for power systems based on fourier transform ［J］. Automation of Electric Power Systems, 2008,32（23）: 67-70,94.
[8]	张同尊，邵俊松，方勇杰.一种基于离散傅里叶变换的频率测量算法［J］. 电力系统自动化，2007，31（22）：70-72.Zhang Tongzun，Shao Junsong，Fang Yongjie. An algorithm for frequency measurement based on DFT［J］. Automation of Electric Power Systems, 2007,31（22）: 70-72.
[9]	磨少清，李啸骢.一种高精度的改进傅里叶测频算法［J］. 电力系统自动化，2003，27（12）：48-49，54.Mo Shaoqing, Li Xiaocong. An improved highaccuracy algorithm for frequency measurement based on fourier transform［J］. Automation of Electric Power Systems, 2003,27（12）: 48-49,54.
[10]	肖朵艳，谭卫斌，张维. 一种实用的电力系统频率实时测量方法［J］. 电力系统保护与控制， 2014，42（21）：29-33.Xiao Duoyan, Tan Weibin, Zhang Wei. A practical method of rea time measurement for power system frequency ［J］.Power System Protection and Control, 2014,42（21）:29-33.
[11]	杨永标，周捷.一种实用的高精度频率测量方法［J］. 继电器， 2007，35（增）：272-275.Yang Yongbiao,Zhou Jie. An utility high accuracy algorithm for measurement of frequency ［J］.Relay 2007, 35（S）:272-275.
[12]	苑鸿，侯思祖，张同良.远动信号频率的测量方法与实现研究［J］.华北电力大学学报，2004，31（2）：80-82.Yuan Hong,Hou Sizu,Zhang Tongliang. Realization of frequency measurement of remote signals ［J］. Journal of North China Electric Power University, 2004,31（2）:80-82.
[13]	宋红卫基于线性插值的电网频率测量方法［J］.工矿自动化, 2012(6):99-102Song Hongwei Power frequency measuring method based on linear interpolation［J］.Industry and Mine Automation,2012(6):99-102.
[14]	方存洋，陈玉兰，潘汉广.一种实用的软件测频算法［J］.电力自动化设备，2007，27（12）：36-39.Fang Cunyang,Chen Yulan，Pan Hanguang.Power frequency measurement algorithm［J］.Electric Power Automation Equipment, 2007,27（12）:36-39.
[15]	李庆扬，王能超，易大义.数值分析［M］. 北京：清华大学出版社，2008

施引文献

资源附件(0)

访问统计

点击查看大图

计量

文章访问数: 766
HTML全文浏览量: 69
PDF下载量: 112
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

矿用智能供电系统高精度测频算法的研究

作者简介:
袁石良（1974—），男，湖南株洲人，博士研究生，高级工程师，主要从事继电保护及检测与自动装置研究工作。

计量

Study on the high precision frequency measurement algorithm in the mine intelligent power supply system

计量

目录

留言板

矿用智能供电系统高精度测频算法的研究

作者简介: 袁石良 （1974—），男，湖南株洲人，博士研究生，高级工程师，主要从事继电保护及检测与自动装置研究工作。

计量

出版历程

Study on the high precision frequency measurement algorithm in the mine intelligent power supply system

计量

出版历程

目录

作者简介:
袁石良（1974—），男，湖南株洲人，博士研究生，高级工程师，主要从事继电保护及检测与自动装置研究工作。